Our Alubutyl has the strongest surface adhesion and no bitumen smell. The Reckhorn DV-10 is self-adhesive and suitable ideal for vibration and sound insulation.

€56.99 *

Content: 4.4 Quadratmeter (€12.95 * / 1 Quadratmeter)

Artikelnummer: ABX-tra.DV-10i

Versandgewicht: 14.0 kg

Prices incl. VAT Depending on the delivery address, the VAT may vary at the checkout.plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Close menu

Product information "ABX-tra 2,5 mm alubutyl and 1 x DV-10 insulating fleece"

Professional quality: The STRONGEST 2.5 mm alubutyl on the market 0.4m x 5 m x 2.5 mm = 2 m² Weight of one sqm = approx. 5 kg
Our new Alubutyl ABX-tra is a composite of aluminium and butyl (no bitumen) and optimally suited for car speaker / sound insulation in the door and boot area. The ABX-tra is completely odourless (see the lab report below) and has a stronger adhesive force (self-adhesive) (easy to apply due to effortless removal of the silicone paper and the non-adhesive edge). But the outstanding feature is the damping, due to the very high weight per m². Of course, you can also use our Alubutyl to build your own loudspeakers / subwoofers and in many other areas where you need vibration insulation. One roll is suitable for insulating 2 car doors and various other rattle points.
Please make sure to wear work gloves, as the hard film is very sharp-edged. DV-10i and Alubutyl are not approved by any car manufacturer for the engine compartment. Therefore, the insurance company may refuse payment in the event of a claim.
A better and cheaper product for damping and sound insulation can hardly be found on the market at present. Don't buy any petroleum or asphalt adulterated insulation foils! The stuff stinks like mothballs in your car. Please bear in mind that the insulation layer is not completely covered when you use it to bridge recesses in the sheet metal, for example. In addition, there are health risks: Guideline values for naphthalene can be found in the download area. https://de.wikipedia.org/wiki/Naphthalin The following test report (in the download area) for our Alubutyl shows that there is no health risk whatsoever. Summary: The result of the analysis shows that the proportion of all 197 substances of very high concern in the sample is less than 0.1%. "Summary: According to the analytical results, concentrations of 197 SVHC substances are less than 0.1% in the submitted sample." Explanations on the EU REACH Regulation: https://de.wikipedia.org/wiki/Verordnung_(EG)_Nr._1907/2006_(REACH) We had a "cheap product" tested for emissions of substances of health concern. The accredited test laboratory found, among others, the substance naphthalene at 500µg/m³. Naphthalene is classified as "probably carcinogenic" according to the CLP regulation (Classification, Labelling and Packaging). In our ABX, only 2 µg/m³ naphthalene was measured under the same test conditions (50 x 20 cm without cover foil). Our tip: Before buying from a cheap supplier, ask for written confirmation that you will not smell mothballs or asphalt after removing the film.
International Material Data System entry available.

DV 10 is self-adhesive ideal for vibration and noise reduction.
4 mats of insulating fleece each 1500 mm x 400 mm x 10 mm = total quantity of 2.4 m² with a high density of approx. 1.08 kg / m². Weight per mat = 0.65 kg
The new DV-10i outperforms all comparable products by using 100% polyfibres without adding cheap waste textiles. The very strong self-adhesive backing facilitates fixation on all surfaces. The protective film is easily removable due to the overlap on one side. Areas of application: Airborne sound insulation in dry motor vehicles, loudspeaker boxes and all other sound insulation.
In the task bar below the product images you will find further important information.